Accessing Port Forwards from Local Networks¶
By default, pfSense does not redirect internally connected devices to reach forwarded ports and 1:1 NAT on WAN interfaces. If a client is trying to reach a service on port 80 or 443 (or the port a web interface is using if it has been changed), the connection will hit the web interface and they will be presented with a certificate error if the GUI is running HTTPS, and a DNS rebinding error since it’s an unrecognized hostname.
NAT Reflection employs techniques to redirect these connections if required. Split DNS is usually the better way if it is possible on a network because it allows for retaining of the original source IP and avoids unnecessarily looping internal traffic through the firewall. Both are explained here.
Method 1: NAT Reflection¶
In order to access ports forwarded on the WAN interface from internal networks, NAT reflection must be enabled.
In order to do this, navigate to System > Advanced, Firewall/NAT tab. On that page, select Pure NAT for NAT Reflection mode for port forwards, check Enable NAT Reflection for 1:1 NAT, and check Enable automatic outbound NAT for Reflection. Click Save.
Pure NAT mode for port forward reflections uses only pf NAT rules to accomplish reflection without any external daemons. It will work with TCP, UDP, and other protocols.
NAT+Proxy mode for port forward reflection sets up a proxy daemon and rules to receive and reflect only TCP connections. This method the only available means of reflection in earlier versions of pfSense. It can work in certain rare circumstances where Pure NAT mode does not. This will only work with single port forwards or ranges of less than 500 ports. It does not work with UDP or other protocols.
Method 2: Split DNS¶
The more elegant solution to this problem involves using Split DNS. Basically this means that internal and external clients resolve hostnames differently.
Internal clients would access resources by hostname, not IP, and clients on the local network would resolve that hostname to the LAN IP address of the actual server, and not the WAN IP as others outside the network would see.
In order for this to work using the DNS Forwarder or Resolver in pfSense, clients will need to have the IP Address of the pfSense router as their primary DNS server.
- www.example.com resolves to public IP 220.127.116.11, which is the WAN IP
- Forward port 80 on 18.104.22.168 to port 80 on 192.168.1.5
- Override www.example.com using System > DNS Resolver (or DNS
Forwarder, if using it instead) and point www.example.com to
- Another internal DNS mechanism could also be used to enact the override.
Screenshots that show the above in practice: