Tuning the Squid Package¶
Some users have reported that making the following change has greatly increased performance:
- Edit /boot/loader.conf.local
- Change kern.ipc.nmbclusters=”0” to kern.ipc.nmbclusters=”32768”
- Reboot the pfSense router
See Tuning and Troubleshooting Network Cards for more information on that setting.
Some people have also seen better performance by using the ufs cache filesystem setting. When using ufs filesystem, vfs.read_max=32 may be increased to vfs.read_max=128 in System > Advanced, Sytem Tunables tab. Read more.
Squid keeps a cache index journal called swap.state in the top level of the squid cache folder, typically /var/squid/cache/swap.sate. This file can grow very large and consume all hard drive space. To ensure this does not happen, set a Log Rotate value in the squid configuration.
By setting a number of days to retain the logs, the squid package will activate a nightly cron job which runs:
squid -k rotate
Part of this rotation process includes compacting the swap.state file, keeping it from getting too large.
If this file is too large and needs to be removed, this may be done while squid is running. After the file is removed, run:
squid -k rotate
This will cause it to be written out again (but compacted). Alternately, tell squid to perform a clean shutdown with:
squid -k shutdown
This will also write the swap.state file out again, but squid will stop after this and must be restarted, so it is a less desirable option.
If the swap.state file is removed while squid is not running, it will have to completely rescan the cache folder to rebuild it once squid is restart. This can be a lengthy and time consuming process. It may be better to remove the contents of the existing cache folder, and rebuild the structure again by running:
See the Squid FAQ entry for more details.
There could be any number of reasons not to do the following things. Be careful, and test any changes.
Caching Windows Updates¶
These settings could break things, but when it works it works beautifully!
If there are a bunch of local PCs that need Windows Updates, but a WSUS server is not an option, squid can cache them.
On the General Settings tab of the squid configuration (Services > Proxy Server), place the following in the Custom Options box at the bottom:
refresh_pattern ([^.]+.|)(download|(windows|)update|).(microsoft.|)com/.*\.(cab|exe|msi|msp) 4320 100% 43200 reload-into-ims; range_offset_limit -1;
On the Cache Management tab of the Squid configuration:
- Change Hard Disk Cache size to something large, say 3000 or 4000 (3GB or 4GB), to accommodate the updates.
- Change the Maximum object size to something big, such as 512000 for 512MB. Going bigger may be needed if any updates larger than that size are released.
If that refresh pattern does not work, try:
refresh_pattern ([^.]+\.)?(download|(windows)?update)\.(microsoft\.)?com/.*\.(cab|exe|msi|msp|psf) 4320 100% 43200 reload-into-ims; range_offset_limit -1;
Caching Mac Updates¶
refresh_pattern ([^.]+.|)(download|adcdownload).(apple.|)com/.*\.(pkg|dmg) 4320 100% 43200 reload-into-ims;
Caching AVG and other Updates¶
As above, but add this before the other options. The same warnings apply:
refresh_pattern ([^.]+.|)avg.com/.*\.(bin) 4320 100% 43200 reload-into-ims; refresh_pattern ([^.]+.|)spywareblaster.net/.*\.(dtb) 4320 100% 64800 reload-into-ims; refresh_pattern ([^.]+.|)symantecliveupdate.com/.*\.(zip|exe) 43200 100% 43200 reload-into-ims refresh_pattern ([^.]+.|)avast.com/.*\.(vpu|vpaa) 4320 100% 43200 reload-into-ims
Tweaking Update Caching / Squid seems to download on its own¶
As an alternative, also try:
quick_abort_min 0 KB; quick_abort_max 0 KB;
To ensure that a file is only downloaded if a user actually receives 70% or more of it. Otherwise if a user requests a file and then aborts, it will download the whole file.
If range_offset_limit is set to
-1 the quick abort options
will NOT work
Setting parent proxy available at the Proxy server: Upstream proxy settings tab. In most cases, these settings work if the parent proxy also squid.
To use a parent proxy on another server (not squid), it is necessary to disable Upstream proxy settings, and use the Custom options in the Proxy server: General settings tab. For example for use as a parent proxy installed package HAVP need to add the line cache_peer 127.0.0.1 parent 3121 7 no-query (Here HAVP configured to use the IP address 127.0.0.1 port 3121).