StatusΒΆ

The Status menu entries display status information and logs for various system components and services.

Captive Portal:When Captive Portal is enabled, this entry shows user and voucher status. See Captive Portal.
CARP (failover):
 Shows the status of CARP IP addresses on this firewall, such as MASTER/BACKUP state for each CARP VIP. Also has controls for HA maintenance mode. See Check CARP status.
Dashboard:A shortcut back to the main page of the pfSense firewall, which displays general system information. See Dashboard.
DHCP leases:Shows a list of all IPv4 DHCP leases assigned by this firewall and provides controls based on those leases, such as adding static mappings. See Leases.
DHCPv6 leases:Shows a list of all IPv6 DHCP leases assigned by this firewall. See Leases.
Filter Reload:Shows the status of the last filter reload request, including active reload actions. Also provides a means to force a filter reload, and to force an XMLRPC configuration sync when HA is configured. See Troubleshooting Firewall Rules.
Gateways:Shows the status of gateways, and gateway groups for multi-WAN. See Routing.
Interfaces:Shows the hardware status for network interfaces, equivalent to using ifconfig on the console. See Interface Status.
IPsec:Shows the status of any configured IPsec tunnels. See IPsec.
Load Balancer:Shows the status of the server Load Balancer pools. See Viewing load balancer status.
Monitoring:Shows graphed data for system statistics such as bandwidth used, CPU usage, firewall states, etc. See Monitoring Graphs.
NTP:Shows the status of the Network Time Protocol server daemon. See NTPD.
OpenVPN:Shows the status of any configured OpenVPN instances. See Checking the Status of OpenVPN Clients and Servers.
Package logs:View logs from certain supported packages.
Queues:Shows the status of traffic shaping queues. See Monitoring the Queues.
Services:Shows the status of system and package service daemons. See Service Status.
System logs:Shows logs from the system and system services such as the firewall, DHCP, VPNs, etc. See System Logs.
Traffic graph:Displays a dynamic realtime traffic graph for an interface. See Traffic Graphs.
UPnP & NAT-PMP:Shows a list of any currently active UPnP port forwards. This entry is only present when the firewall contains more than one interface. See UPnP & NAT-PMP.
Wireless:Shows a list of any currently available wireless networks in range, along with signal levels. This menu entry is only present if the firewall has an assigned wireless interface. See Check Wireless Status.