|
Indoor enclosure for the Ubiquiti RouterStation PRO
In stock.
The Netgate RouterStation PRO enclosure is an aluminum extrusion enclosure for the Ubiquiti RouterStation PRO board. The RouterStation PRO board easily slides in and out of the case for easy access to the miniPCI slots.
The front panel includes cutouts for four ethernet ports, SDIO port, DC power, USB 2.0 port, reset button, serial DB9 connector, labels, three RP-SMA punchouts for antennas, and cooling vents.
The rear panel includes punch-outs for upto six RP-SMA antennas, a viewport for the six internal LEDs, mounting punch-outs for the lightguide and cooling vents.
Specification:
- Aluminum extrusion case with custom cutouts for the RouterStation PRO.
- Light guide for the internal LEDs
- Black textured semi-gloss finish
- 4 rubber feet
- Dimensions: 1.375" in high x 6.25" in wide x 5" in deep
Additional Information:
Note this is a enclosure kit you will need to self-assemble. Our design includes many knockouts to provide a flexible enclosure to meet your specific needs.
The die cuts the optional antenna openings such that a relatively solid "hit" from a sharp object (i.e. a phillips screwdriver) will "knock" the cutout out of the endplate. It's quite easily done if you've done electrical work before and have removed knockouts from electrical panels.
Please contact us for 100+ piece custom orders. We would be happy to assist you.
This is the "case only" option. No boards, pigtails, antennas or power.
You can purchase items piecemeal or purchase a kit here.
Notes:
During development of this case, we noted a few problems with the placement of certain parts on the board, such as the serial port, LED indicators and miniPCI slots. We have taken steps to develop workarounds in the case design to support the current version of the RouterStation PRO boards.
Here are the known issues:
- The LED indicators are small, are not edge mounted, and have a very short pitch. We have developed a custom light guide to bring the indicators out to the case edge. If you do not need the light guide, contact us for a quote.
- Serial port: The serial port is mounted too close to the end of the board. The flange on the end of the serial port will scrape against the case when assembling.
- MiniPCI slot 1:
- When you insert a miniPCI card into slot 1 and insert it into the case, the edge of the card is very close to the case. If you are using a miniPCI card with MMCX connectors that are mounted on the edge of the card (SR series), you will not be able to attach the pigtails.
- Large, non-standard sized cards such as the SR9 and XR9 will not fit in slot 1.
- You can utilize cards that have connectors on the face of the card (XR2, CM9)
- MiniPCI slot 3:
- Use miniPCI cards that have U.FL connectors or edge mounted MMCX connectors (SR series) only in this slot. Do not attempt to use a miniPCI card that has face-mounted MMCX connectors. The clearance on the bottom of the board is too tight.
- If you choose to ignore this suggestion, please add a non-conducting insulating layer to the bottom of the case prior to insertion and use of the third miniPCI card with face mounted MMCX connectors. Otherwise your system may not function properly.
- New: DO NOT modify the RouterStation PRO board or case. Netgate is not responsible for any problems you encounter if you modify your board or case. The fit is deliberately tight in order to keep the board from moving.
- We have had one report of the board shorting out AFTER someone modified the board and the case. If you choose to make modifications, please protect your board by adding a strip of Scotch Super 33+ Vinyl electrical tape, or other electrical insulating tape along the edge that slides into the groove. This should prevent the resistors from touching the case and shorting out.
Warranty and Support Information:
- Standard 30 day return policy
- 90 day manufacturers limited warranty on unmodified cases. Modifying your case will void your warranty.
- All Specifications subject to change without notice.
|
Wireless Cards
ALIX Kits
